Guard Plate
(For Doors Opening Out) No. ODG-6 All doors using spring latch type locks should have the added protection of a latch/bolt guard. The flanges of these guards will keep any prying tools away from the latch.The ODG-6 is screwed directly onto the edge of the door. These guards are made of heavy gauge cold rolled steel and have a bright zinc plating. Guard plates come complete with all necessary hardware and illustrated instructions. No. ODG-6
Guard Plate (For Doors Opening Out) 3" (7.62cm) Lock Face Opening 1-1/16" W x 5-5/8" H (26.9 x 181.9mm) Bright Zinc Plating |
Heavy Duty Guard Plate
(For Doors Opening Out) No. VDG-10 The VDG-10 is our strongest and most popular guard plate. It is 14" (35.5cm) long and is made from 2 pieces of 16 gauge cold rolled steel, welded together with a baked matte bronze finish. This guard plate offers maximum resistance to prying and forcing. It mounts onto your door with 2 carriage bolts going through the door and is anchored with a nut and cap nut on the inside. Four (4) wood screws go into the edge of the door. Guard plates come complete with all necessary hardware and illustrated instructions. No. VDG-10
Heavy Duty Guard Plate (For Doors Opening Out) 1-3/4" W x 14" H (43.9 x 355.6mm) Baked Matte Bronze Finish |
Offset Guard Plates
(For Doors Opening Out) No. OVDG-11 Offset Guard Plates are used on vestibule doors with projecting door casings (for doors that are not flush with the frame). These plates are easily installed by drilling only 2 holes and using the pair of through bolts and nuts. The guards are made of cold rolled steel and have a satin stainless finish. The 14" (35.5cm) overall length extends 3" (7.6cm) beyond the average lock face, protecting against unauthorized, forcible entry. There are 4 sizes available. Guard plates come complete with all necessary hardware and illustrated instructions. No. OVDG-11
1/4" (6.35mm) offset 1.8"W x 14"H (46 x 356mm) Satin Stainless Finish No. OVDG-12 3/8" (9.53mm) offset 1.8"W x 14"H (46 x 356mm) Satin Stainless Finish No. OVDG-13 7/16" (11.11mm) offset 1/8"W x 14"H (46 x 356mm) Satin Stainless Finish No. OVDG-14 9/16" (14.28mm) offset 1/8"W x 14"H (46 x 356mm) Satin Stainless Finish |
© COPYRIGHT 2023. ALL RIGHTS RESERVED.
|
Hudson Lock, LLC
|